Sustainable Composites: Analysis of Filler-Rubber Interaction in Natural Rubber-Styrene-Butadiene Rubber/Polyurethane Composites Using the Lorenz-Park Method and Scanning Electron Microscopy.

This study examined micronized polyurethane residues as a reinforcing filler in elastomeric composites made from natural rubber (NR) and styrene-butadiene rubber (SBR). Due to growing environmental concerns, this research aimed to find sustainable alternatives to synthetic materials. The results indicated that adding micronized polyurethane improved the mechanical properties of the composites, reinforcing the polymer matrix and increasing the cross-link density as a barrier against solvents. The composites met the requirements for industrial applications, though; at 40 phr of polyurethane filler, material deformation was reduced, indicating saturation. FTIR analysis confirmed the homogeneity of the materials without chemical reactions, while electron microscopy revealed an increase in the number of particles and irregularities with the filler. The composite with 10 phr showed a lower volume loss in abrasion resistance, meeting the standards for soles. The composite with 30 phr of polyurethane achieved the best results without the filler's saturation and met the footwear industry's requirements. The results show the potential for sustainable practices in industry using this elastomeric blend.

Controlled release of vitamin D3 using a nanocellulose-based membrane.

Epidemiological studies show that a significant fraction of the global population presents low levels of vitamin D3. In order to address this problem, one way to administer the vitamin is to incorporate it in novel drug delivery systems, such as transdermal devices. A possible substance for this purpose is cellulose, which has a long history of use in the health area. However, the application of nanostructured cellulose membranes, as local drug delivery systems, remains a challenge. To develop a crystalline nanocellulose membrane as a new tool for the release of vitamin D3. A new nanostructured membrane containing nanocellulose extracted from cotton linter and vitamin D3 was produced using the "casting" technique. The membrane was characterized using high-resolution scanning electron microscopy (FEG-SEM) and Fourier transform infrared spectroscopy (FT-IR). The kinetics of vitamin release was quantified using molecular spectroscopy (UV-Vis). The FT-IR spectra showed the presence of all the active components in the membrane sample, without structural alterations or the formation of new bonds. The FEG-SEM images showed the presence of vitamin crystals on the surface and in the interior of the membrane. The release of vitamin D3 occurred in a sustained manner, obtaining 3029 IU mL-1 of vitamin D3 in 60 min. The findings demonstrated that the membrane could be used for the sustained release of vitamin D3. This new biomaterial has potential as a new model for vitamin supplementation in individuals with vitamin D3 deficiency.

Investigating the Binding Heterogeneity of Trace Metal Cations With SiO2 Nanoparticles Using Full Wave Analysis of Stripping Chronopotentiometry at Scanned Deposition Potential.

Silica oxides nano- and microparticles, as well as silica-based materials, are very abundant in nature and industrial processes. Trace metal cation binding with these bulk materials is generally not considered significant in speciation studies in environmental systems. Nonetheless, this might change for nanoparticulate systems as observed in a previous study of Pb(II) with a very small SiO2 particle (7.5 nm diameter). Besides, metal binding by those nanoparticles is surprisingly characterized by a heterogeneity that increases with the decrease of metal-to-particle ratio. Therefore, it is interesting to extend this study to investigate different trace metals and the influence of the nanoparticle size on the cation binding heterogeneity. Consequently, the Cd(II), Pb(II), and Zn(II) binding by two different sized SiO2 nanoparticles (Ludox LS30 and TM40) in aqueous dispersion was studied for a range of pH and ionic strength conditions, using the combination of the electroanalytical techniques Scanned Stripping ChronoPotentiometry and Absence of Gradients and Nernstian Equilibrium Stripping. The coupling of these techniques provides the free metal concentration in the bulk (AGNES) and information of the free and complex concentration at the electrode surface for each Stripping Chronopotentiometry at Scanned deposition Potential (SSCP). A recent mathematical treatment allows the reconstruction of a portion of the metal to ligand binding isotherm with the included heterogeneity information using the full SSCP wave analysis. In this work, we observed that the Zn(II) binding is homogeneous, Cd(II) is slightly heterogeneous, and Pb(II) is moderately heterogeneous, whereas the results obtained with the 7.5 nm diameter nanoparticle are slightly more heterogeneous than those obtained with the one of 17 nm. These findings suggest that the Zn(II) binding is electrostatic in nature, and for both Cd(II) and Pb(II), there should be a significant chemical binding contribution.

Development, standardization, and validation of a biofilm efficacy test: The single tube method.

Methods validated by a standard setting organization enable public, industry and regulatory stakeholders to make decisions on the acceptability of products, devices and processes. This is because standard methods are demonstrably reproducible when performed in different laboratories by different researchers, responsive to different products, and rugged when small (usually inadvertent) variations from the standard procedure occur. The Single Tube Method (ASTM E2871) is a standard method that measures the efficacy of antimicrobials against biofilm bacteria that has been shown to be reproducible, responsive and rugged. In support of the reproducibility assessment, a six-laboratory study was performed using three antimicrobials: a sodium hypochlorite, a phenolic and a quaternary/alcohol blend, each tested at low and high efficacy levels. The mean log reduction in viable bacteria in this study ranged from 2.32 to 4.58 and the associated reproducibility standard deviations ranged from 0.89 to 1.67. Independent follow-up testing showed that the method was rugged with respect to deviations in sonication duration and sonication power but slightly sensitive to sonicator reservoir degassing and tube location within the sonicator bath. It was also demonstrated that when a coupon was dropped into a test tube, bacteria can splash out of reach of the applied antimicrobials, resulting in substantial bias when estimating log reductions for the products tested. Bias can also result when testing products that hinder the harvesting of microbes from test surfaces. The culmination of this work provided recommended changes to the early version of the standard method E2871-13 (ASTM, 2013b) including use of splashguards and microscopy checks. These changes have been incorporated into a revised ASTM method E2871-19 (ASTM 2019) that is the basis for the first regulatory method (ATMP-MB-20) to substantiate "kills biofilm" claims for antimicrobials registered and sold in the US.

Effect of the competition of Cu(II) and Ni(II) on the kinetic and thermodynamic stabilities of Cr(III)-organic ligand complexes using competitive ligand exchange (EDTA).

The effect of competition of Cu(II) and Ni(II) on the kinetic stability of Cr(III) complexed with natural organic matter (NOM) was characterized using EDTA exchange with single-stage tangential-flow ultrafiltration. For a water sample from Serra de Itabaiana, 3% of spiked Cr(III) was exchanged, while for a sample from the Itapanhaú River, 7, 10, 10, and 21% was exchanged in experiments using Cr(III) alone and in combination with Cu(II), Ni(II), or Cu(II) + Ni(II), respectively. Times required to reach exchange equilibrium with EDTA were less than 360 min. The influence of competition from Ni(II) and Cu(II) on the availability of complexed Cr(III) was low, demonstrating preference of the ligand sites for Cr(III). This was correlated with sample humification, as confirmed by EPR and (13)C NMR analyses. Exchange efficiency was in the order Cu > Ni > Cr, and the process could be readily described by first order kinetics, with average rate constants of 0.35-0.37 h(-1).

Adsorption/desorption of arsenic by tropical peat: influence of organic matter, iron and aluminium.

The objective of this work was to investigate the interaction of arsenic species (As(III) and As(V)) with tropical peat. Peat samples collected in Brazil were characterized using elemental analysis and 13C NMR. Adsorption experiments were performed using different concentrations of As with peat in natura and enriched with Fe or Al, at three different pH levels. Peat samples, in natura or enriched with metals, were analysed before and after adsorption processes using Fourier transform infrared spectroscopy (FTIR) spectroscopy. The adsorption kinetics was evaluated, and the data were fitted using the Langmuir and Freundlich models. The results showed that interaction between As and peat was dependent on the levels of organic matter (OM) and the metals (Fe and Al). As(III) was not adsorbed by in natura peat or Al-enriched peat, although small amounts of As(III) were adsorbed by Fe-enriched peat. Adsorption of As(V) by the different peat samples ranged from 21.3 to 52.7 µg g(-1). The best fit to the results was obtained using the pseudo-second-order kinetic model, and the adsorption of As(V) could be described by the Freundlich isotherm model. The results showed that Fe-enriched peat was most effective in immobilizing As(V). FTIR analysis revealed the formation of ternary complexes involving As(V) and peat enriched with metals, suggesting that As(V) was associated with Al or Fe-OM complexes by metal bridging.

Dynamics and heterogeneity of Pb(II) binding by SiO2 nanoparticles in an aqueous dispersion.

Pb(II) binding by SiO(2) nanoparticles in an aqueous dispersion was investigated under conditions where the concentrations of Pb(2+) ions and nanoparticles are of similar magnitude. Conditional stability constants (log K) obtained at different values of pH and ionic strength varied from 4.4 at pH 5.5 and I = 0.1 M to 6.4 at pH 6.5 and I = 0.0015 M. In the range of metal to nanoparticle ratios from 1.6 to 0.3, log K strongly increases, which is shown to be due to heterogeneity in Pb(II) binding. For an ionic strength of 0.1 M the Pb(2+)/SiO(2) nanoparticle system is labile, whereas for lower ionic strengths there is loss of lability with increasing pH and decreasing ionic strength. Theoretical calculations on the basis of Eigen-type complex formation kinetics seem to support the loss of lability. This is related to the nanoparticulate nature of the system, where complexation rate constants become increasingly diffusion controlled. The ion binding heterogeneity and chemodynamics of oxidic nanoparticles clearly need further detailed research.

Determination of labile inorganic and organic species of Al and Cu in river waters using the diffusive gradients in thin films technique.

The diffusive gradients in thin films (DGT) technique, using a diffusive gel or a restrictive gel, was evaluated for the determination of labile inorganic and organic species of Al and Cu in model synthetic solutions and river water samples. Experiments were performed both in situ and in the laboratory. In the solutions containing Al ions, the major labile fraction consisted of inorganic species. The organic complex fractions were mainly kinetically inert. For the model Cu solutions, the most labile fraction consisted of inorganic species; however, significant amounts of labile organic complexes of Cu were also present. A comparison was made between the results obtained using restrictive gel DGT and tangential flow ultrafiltration (TF-UF). The Cu fraction determined by restrictive gel DGT (corresponding to the "free" ions plus the labile fraction of small molecular size complexes) was larger than that determined by TF-UF (corresponding to all small molecular size ions), suggesting that the techniques exhibited different porosities for discrimination of inorganic species. For the river water samples analyzed in the laboratory, less than 45% of the analytes were present in labile forms, with most being organic species. For the in situ measurements, the labile inorganic and organic fractions were larger than those obtained in the laboratory analyses. These differences could have been due to errors incurred during sample collection and storage. All results were consistent with those found using two different methods, namely, solid-phase extraction and the DGT technique employing the apparent diffusion coefficient.

Approach combining on-line metal exchange and tangential-flow ultrafiltration for in-situ characterization of metal species in humic hydrocolloids.

This paper deals with the development and optimization of an analytical procedure using ultrafiltration and a flow-injection system, and its application in in-situ experiments to characterize the lability and availability of metal species in humic-rich hydrocolloids. The on-line system consists of a tangential flow ultrafiltration device equipped with a 3-kDa filtration membrane. The concentration of free ions in the filtrate was determined by atomic-absorption spectrometry, assuming that metals not complexed by aquatic humic substances (AHS) were separated from the complexed species (M-AHS) retained by the membrane. For optimization, exchange experiments using Cu(II) solutions and AHS solutions doped with the metal ions Ni(II), Mn(II), Fe(III), Cd(II), and Zn(II) were carried out to characterize the stability of the metal-AHS complexes. The new procedure was then applied in-situ at a tributary of the Ribeira do Iguape river (Iguape, São Paulo State, Brazil) and evaluated using the ions Fe(III) and Mn(II), which are considered to be essential constituents of aquatic systems. From the exchange between metal-natural organic matter (M-NOM) and the Cu(II) ions it was concluded that Cu(II) concentrations >485 microg L(-1) were necessary to obtain maximum exchange of the complexes Mn-NOM and Fe-NOM, corresponding to 100% Mn and 8% Fe. Moreover, the new analytical procedure is simple and opens up new perspectives for understanding the complexation, transport, stability, and lability of metal species in humic-rich aquatic environments.

In situ application of a cellulose bag and an ion exchanger for differentiation of labile and inert metal species in aquatic systems.

This work involved the development and application of a new analytical procedure for in-situ characterization of the lability of metal species in aquatic systems by using a system equipped with a diffusion membrane and cellulose organomodified with p-aminobenzoic acid groups (DM-Cell-PAB). To this end, the DM-Cell-PAB system was prepared by adding cellulose organomodified with p-aminobenzoic acid groups (Cell-PAB) to pre-purified cellulose bags. After the DM-Cell-PAB system was sealed, it was examined in the laboratory. The in-situ application involved immersing the DM-Cell-PAB system in two different rivers, enabling us to study the relative lability of metal species (Cu, Cd, Fe, Mn, and Ni) as a function of time and quantity of exchanger. The procedure is simple and opens up a new perspective for understanding environmental phenomena relating to the complexation, transport, stability, and lability of metal species in aquatic systems rich in organic matter.

New analytical procedure based on a cellulose bag and ionic exchanger with p-aminobenzoic acid groups for differentiation of labile and inert metal species in aquatic systems.

A new procedure was developed for the in situ characterization of the lability of metal species in aquatic systems by using a system equipped with a diffusion membrane and cellulose organomodified with p-aminobenzoic acid groups (DM-Cell-PAB). To this end, the DM-Cell-PAB system was prepared by adding cellulose organomodified with p-aminobenzoic acid groups (Cell-PAB) to pre-purified cellulose bags. After the DM-Cell-PAB system was sealed, it was examined in the laboratory to evaluate the influence of complexation time, mass of exchanger, pH, metal ions (Cu, Cd, Fe, Mn, and Ni), and concentration of organic matter on the relative lability of metal species. It was found that the pH and kinetics strongly influence the process of metal complexation by the DM-Cell-PAB system. At all pH levels, Cd, Mn, and Ni showed lower complexation with Cell-PAB resin than Cu and Fe metals. Note that relative lability of metals complexed to aquatic humic substances (AHS) in the presence of Cell-PAB resin showed the following order: Cu approximately or = Fe>>Ni>Mn=Cd. The results presented here also indicate that increasing the AHS concentration decreases the lability of metal species by shifting the equilibrium to AHS-metal complexes. Our results indicate that the system under study offers an interesting alternative that can be applied to in situ experiments for differentiation of labile and inert metal species in aquatic systems.